Simulated Giant Honey Bee Model for Insect Exhibition
Product Video
Product Features
-
Flocked Silicone Skin, Ultra-Real Bee Visual Restoration: Different from ordinary smooth insect models, this Giant Honey Bee Model adds a flocking fur bonding process after three layers of silicone coating, perfectly restoring the fuzzy villus texture of real honeybee body surface. The whole production strictly follows standard animatronic manufacturing flow: steel frame + 24V DC motor + high-density sponge carving + soldering texture + fabric reinforcement + triple silicone brushing + fur adhesion. Fine textures such as compound eye lines, body segments and vein lines are hot-engraved on sponge by high-temperature electric soldering iron, with gradient weather-resistant paint sprayed finally. It looks identical to enlarged real bees, and the fur is tightly bonded without shedding after long-term indoor and outdoor display, greatly improving exhibition display grade for Honey Bee for Insect Exhibition.
-
Four Trigger Modes + Complete Dynamic & Sound System, Adaptable to All Exhibition Scenarios: This Simulated Giant Honey Bee Model installs independent 24V silent DC motors for wings, head, antenna and abdomen separately. Supporting four operation modes: infrared sensor trigger, button start, remote control start, coin-operated start. When visitors approach the exhibit, infrared sensor automatically activates all movements and bee buzzing sound; venue staff can manually control via buttons or remote control for guided science lectures; coin mode realizes unattended automatic operation for commercial exhibition malls. The controller freely adjusts movement speed, sound volume and cycle interval, solving the single operation pain point of traditional static insect exhibits and enriching interactive experience of insect show venues.
-
Dual Indoor & Outdoor Use: The whole Honey Bee Model adopts 110V/220V wide voltage input, built-in transformer rectified to stable 24V DC to drive all motors, completely eliminating electric leakage risks for parent-child exhibition areas. All mechanical transmission structures are wrapped by thick sponge and soft silicone flocking skin without sharp edges. The 1.8m moderate size fits multiple scenes: permanent museum insect galleries, seasonal mobile insect roadshows, zoo insect zones, school science fairs, mall parent-child theme exhibitions, park insect exploration camps. As high-traffic photo props, it creates exclusive bee-themed check-in spots and helps venues gain social media exposure while realizing popular science value.
| Product Name | Simulated Giant Honey Bee Model for Insect Exhibition | Overall Dimension | Length: 1.8m |
|---|---|---|---|
| Drive Motor | Independent 24V silent DC motors for wings, head, antenna, abdomen | Standard Movements & Sound Wing fluttering, head shaking, | Wing fluttering, head shaking, antenna swaying, abdomen undulation, realistic honeybee buzzing sound |
| Control Mode | Infrared sensor trigger | Outer Craft & Material | High-carbon steel anti-rust frame + high-density sponge + high-elastic cloth reinforcement + triple silicone coating + surface flocking fur + weather-resistant spray paint |
| Power Supply | 110V/220V AC input, built-in transformer rectified to stable 24V DC to drive all motors | Application Scenarios | Natural history museum insect gallery, zoo insect area, school science fair, mall parent-child insect exhibition, outdoor insect theme park, mobile traveling insect roadshow |
| Customizable Options | Appearance, Color, Movements, Dimensions, Sound Effects, etc. | Shipping Options | Sea freight and air freight are both accessible |
Product Description
The production of this 1.8m Simulated Giant Honey Bee Model follows complete standardized animatronic production procedures for insect exhibits, fully matching the craft standard of Honey Bee for Insect Exhibition:
1. Steel Skeleton Welding: Use high-carbon steel tubes to weld integral bee body frame, reserve installation positions for 24V DC motors and transmission structures on wings, head, antenna and abdomen; all metal parts undergo double-layer anti-rust paint spraying to prevent moisture corrosion during long-term exhibition.
2. Electrical Wiring Layout: Adopt 1.5-2.5mm² multi-core RV cables to connect each motor and infrared sensor, all circuits are uniformly concentrated at the bee abdomen, extended with 5m waterproof cable equipped with aviation plug to connect the main controller, easy to disassemble and maintain for exhibition replacement.
3. Sponge Sculpting & Texture Engraving: Wrap high-density sponge on steel frame, sculpt complete bee body contour, compound eyes, thorax and abdomen segmentation with professional carving tools; use 200-300W high-temperature electric soldering iron to hot-engrave 3-5mm deep vein and fine villus texture on sponge surface to restore insect body details.
4. Reinforcement & Silicone Coating: Cover the textured surface with high-elastic cloth and press into texture grooves to enhance sponge anti-tear performance; evenly brush transparent silicone three times (1.5mm / 2.5mm / 4-5mm layer by layer) to form elastic outer skin.
5. Flocking & Spraying Process: Evenly bond fine soft flocking fur on the cured silicone surface to simulate natural bee villus; mix oil paint with diluted silicone and spray gradient natural color layer by layer, with waterproof and UV-resistant coating on the outermost layer.
6. Electrical Aging Test: Install independent bee buzzing audio module, connect controller for 24-hour continuous aging test, inspect all movements, sound and sensor sensitivity before packaging and delivery, to ensure stable operation in long-term exhibition.
7. Packaging: Whole model wrapped with shockproof bubble film and anti-scratch electrostatic film, packed into export solid wooden case to avoid collision damage during cross-city and cross-country exhibition transportation.
Frequently Asked Questions (FAQ)
Q1: Can this Honey Bee Model be used for mobile traveling insect exhibitions?
Q2: Will the flocked fur on the bee skin fall off after long-time display outdoors?
A2: We use special environment-friendly adhesive to bond the flocking fur on silicone skin, matched with UV-resistant top paint. If placed outdoors for a long time, it is recommended to equip a simple sunshade awning to avoid long-term direct sunlight; indoor museum permanent display can keep the fur intact for more than 2 years without shedding.
Q3: Is the infrared induction function suitable for children's science museum interactive areas?
A3: A: Very suitable. The infrared sensing distance is adjustable (0.5-3m). When kids walk close, the bee automatically flaps wings, shakes head and makes buzzing sounds, without manual operation. The 24V low-voltage system and fully wrapped soft flocking skin have no safety hazards for 3-12 years old children to watch and touch at close range.
Q4: What's the after-sales service if the motor or sensor breaks down during exhibition?
A4: The whole Honey Bee Model enjoys a 12-month warranty (excluding artificial scratch and fur damage). The control system and electrical accessories are universal spare parts; our engineers can guide troubleshooting and replacement via online video remotely, avoiding long-term exhibition shutdown losses for insect show venues.
Send Inquiry
We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.