What Mistakes Can Shorten the Lifespan of Animatronic Dinosaurs

Don't Do This to Your Animatronic Dinosaurs

Taking good care of animatronic dinosaur models can seriously extend their lifespan. On the flip side, the wrong moves can cut that lifespan way short. Let's break down what you shouldn't do if you want these prehistoric replicas to last.

Under normal circumstances, animatronic dinosaurs typically last 5 - 8 years. Some well - maintained ones can even go over a decade! But certain actions can tank that lifespan fast.

No - Nos That Shorten Lifespan

1. Sunburn for the Control Box: Leaving the control box out in direct sunlight for too long is a disaster waiting to happen. it may burn out the integrated circuits and high - current components, such as MOSFETs and high - power diodes.. Imagine leaving your phone in a hot car—same deal, but for your dino's "brain."

2. Waterlogged Woes: Exposing the control box to rain is just as bad. If water gets inside and you power it up, say goodbye to the fuse and maybe even the circuit board. It's like dropping your laptop in a puddle and hitting the power button.

3. Forcing the Dino's Hand (or Tail): Trying to stop a moving dinosaur by force is a huge no - no. If it's programmed to swing left and you push it right, you're putting insane stress on its internal mechanisms. It's like trying to stop a running treadmill with your hands-you'll break something.

4. Leaving It Running Overnight: Forgetting to turn off the control box at the end of the day is a rookie mistake. Keeping the dinosaur running non - stop wears out the motor brushes and drains the electromagnets in the control box. It's like never turning off your car engine-eventually, something's gonna give.

5. Voltage Mix - Up: Using the wrong voltage is an easy way to toast your dino's insides. Plugging a 220V model into a 110V outlet (or vice versa) can fry the circuit board and the motor. It's like using the wrong charger for your device-boom, instant damage.

How to Keep Your Dino in Tip - Top Shape

1. Power Down When Done: Always turn off the power when the animatronic dinosaur isn't in use. A simple flip of the switch on the control box does the trick. This saves energy and gives the motors a much - needed break. It's like turning off the lights when you leave a room-basic but crucial.

2. Use the Rain Shield: Make the most of that fiberglass rain shield we provide (you might also call it an info display board). Cover the control box and speakers with it, and you'll protect them from both rain and sun. This keeps the electronics safe from short circuits and overheating. Think of it as an umbrella for your dino's gear.

3. No Roughhousing: Keep visitors-especially little ones-from manhandling the dinosaur models. Rough touches can damage the motors and electronics when the dino moves, not to mention tear up the skin. It's like telling kids not to climb on museum exhibits.

4. Hands Off the Equipment: Don't let people mess with the electronics at the dinosaur's base, like the control box and speakers. This prevents damage and keeps everyone safe from electric shocks. It's common sense, but it bears repeating.

5. Put Up Signs: Post "Please Don't Touch" signs near the dinosaurs and "Danger! Electric Shock Risk" warnings around the electronics. A little signage goes a long way in keeping things safe.

Wrapping It Up

Remember, those 5 bad habits can wreck your animatronic dinosaur's lifespan, so steer clear of them. And follow those 5 tips to keep everything running smoothly. If you're running a dinosaur exhibit or park, make sure your staff knows these points backward and forward - it's key to long - term success.

If you're one of our customers, these do's and don'ts are your roadmap to a longer - lasting animatronic dinosaur. Have any questions? Just reach out - we're here to help!